Show Network-Policy Profile - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show network-policy profile

Use the show network policy profile privileged EXEC command to display the network-policy profiles.
Syntax Description
profile
number
detail
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(50)SE
12.2(53)SE2
Examples
This is an example of output from the show network-policy profile command:
Switch# show network-policy profile
Network Policy Profile 10
voice vlan 17 cos 4
Interface:
none
Network Policy Profile 30
voice vlan 30 cos 5
Interface:
none
Network Policy Profile 36
voice vlan 4 cos 3
Interface:
Interface_id
Related Commands Command
network-policy
network-policy profile (global
configuration)
network-policy profile
(network-policy configuration)
OL-21522-02
show network-policy profile [profile number] [detail] [ | {begin | exclude | include} expression]
(Optional) Display the network-policy profile number. If no profile is entered, all
network-policy profiles appear.
(Optional) Display detailed status and statistics information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
This command was introduced.
Description
Applies a network-policy to an interface.
Creates the network-policy profile.
Configures the attributes of network-policy profiles.
Catalyst 3750-X and 3560-X Switch Command Reference
show network-policy profile
2-727