Cisco Catalyst 3560X-24P Command Reference Manual page 192

dot1x control-direction
If you enter the dot1x control-direction in interface configuration command to enable unidirectional
control, this appears in the show dot1x all command output:
ControlDirection
If you enter the dot1x control-direction in interface configuration command and the port cannot support
this mode due to a configuration conflict, this appears in the show dot1x all command output:
ControlDirection
Related Commands Command
show dot1x
interface-id]
Catalyst 3750-X and 3560-X Switch Command Reference
2-160
= In
= In (Disabled due to port settings)
Description
[all | interface Displays control-direction port setting status for the specified
interface.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02