Mls Qos Queue-Set Output Threshold - Cisco Catalyst 3560X-24P Command Reference Manual

Cisco ios release 12.2(55)se
Hide thumbs Also See for Catalyst 3560X-24P:
Table of Contents

Advertisement

mls qos queue-set output threshold

mls qos queue-set output threshold
Use the mls qos queue-set output threshold global configuration command on the switch stack or on
a standalone switch to configure the weighted tail-drop (WTD) thresholds, to guarantee the availability
of buffers, and to configure the maximum memory allocation to a queue-set (four egress queues per
port). Use the no form of this command to return to the default setting.
Syntax Description
qset-id
queue-id
drop-threshold1
drop-threshold2
reserved-threshold
maximum-threshold
Defaults
When quality of service (QoS) is enabled, WTD is enabled.
Table 2-17
Table 2-17
Feature
WTD drop threshold 1
WTD drop threshold 2
Reserved threshold
Maximum threshold
Command Modes
Global configuration
Command History
Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
2-378
mls qos queue-set output qset-id threshold queue-id drop-threshold1 drop-threshold2
reserved-threshold maximum-threshold
no mls qos queue-set output qset-id threshold [queue-id]
ID of the queue-set. Each port belongs to a queue-set, which defines all the
characteristics of the four egress queues per port. The range is 1 to 2.
Specific queue in the queue-set on which the command is performed. The
range is 1 to 4.
Two WTD thresholds expressed as a percentage of the allocated memory of
the queue. The range is 1 to 3200 percent.
Amount of memory to be guaranteed (reserved) for the queue and expressed
as a percentage of the allocated memory. The range is 1 to 100 percent.
Enable a queue in the full condition to get more buffers than are reserved for
it. This is the maximum memory the queue can have before the packets are
dropped. The range is 1 to 3200 percent.
shows the default WTD threshold settings.
Default Egress Queue WTD Threshold Settings
Modification
This command was introduced.
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Queue 1
Queue 2
100 percent
200 percent
100 percent
200 percent
50 percent
100 percent
400 percent
400 percent
Queue 3
Queue 4
100 percent
100 percent
100 percent
100 percent
50 percent
50 percent
400 percent
400 percent
OL-21522-02

Advertisement

Table of Contents
loading

Table of Contents