Show Cisp - Cisco Catalyst 3650 series Command Reference Manual

show cisp

To display CISP information for a specified interface, use the show cisp command in privileged EXEC mode.
show cisp {[clients | interface interface-id] | registrations | summary}
Syntax Description
clients
interface interface-id
registrations
summary
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Cisco IOS XE Denali 16.3.1
Examples This example shows output from the show cisp interface command:
Device# show cisp interface fast 0
CISP not enabled on specified interface
This example shows output from the show cisp registration command:
Device# show cisp registrations
Interface(s) with CISP registered user(s):
------------------------------------------
Fa1/0/13
Auth Mgr (Authenticator)
Gi2/0/1
Auth Mgr (Authenticator)
Gi2/0/2
Auth Mgr (Authenticator)
Gi2/0/3
Auth Mgr (Authenticator)
Gi2/0/5
Auth Mgr (Authenticator)
Gi2/0/9
Auth Mgr (Authenticator)
(Optional) Display CISP client details.
(Optional) Display CISP information about the specified interface. Valid
interfaces include physical ports and port channels.
Displays CISP registrations.
(Optional) Displays CISP summary.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show cisp
Modification
This command was introduced.
This command was reintroduced.
This command was not supported
in Cisco IOS XE Denali 16.1.x and
Cisco IOS XE Denali 16.2.x
813