Operation Procedure; Related Elements - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Bit Memory Table
Screen switching function
Alarm function

7-4-1 Operation Procedure

Setting

7-4-2 Related Elements

PT
Screen 1
Screen 2
Displayed in
response to
Alarm list
bit going ON
ABC
Displayed
in response
to touching
a message
Stored in alarm history
ABC 96/04/10
The range of bit memory table entries used for checking bit status is
set by the alarm list.
The bit memory table setting dialog box is displayed by following either of the op-
erations described below.
S At the properties of the alarm list element, click on the table entry number field.
S Select [Tools] (menu bar)
For bit memory table entries, the objective of the operation is specified by clicking
on a line. The necessary setting can be made by input using a keyboard or by
selection using a drop-down list.
For the operation procedure for
, and
cannot be used if bit memory table entry is displayed by the operation
using an element property.)
Alarm list element
Alarm history element
Bit memory table
Screen switching
Screen No. :
PC (PLC)
Allocated bit ON
address
Bit memory table
Specifying item
to be called
Character string
memory table
(String table) No.: 10
Specifying item
to be called
Image/library code: FE20
PC (PLC) address: 0001000
[Table], then click [Bit Memory] tab.
, refer to 7-1 Common Operation. (Note that
[Object] [Alarm] [List]
[Object] [Alarm] [History]
Section
2
Specified PC (PLC) bit
: 00010
Character string
memory table
(String table)
10 ABC
11 DEF
12 GHI
13 JKL
Image data
ON
FE20
Specified PC (PLC) bit
, ,
7-4
,
287