Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 133

Common Operation
Reference: Color setting is possible only for color-type PT.
120
S Background of label of lamps and touch switches
S OFF state color of lamps and touch switches
S Background of element tiling patterns
S Setting the color for text and numerals
For text and numerals, color setting is possible both for characters and back-
ground.
Foreground: Specify the color of text and numerals.
Background: Specify the color for the background of text and numerals.
If [Transparent] is specified, elements arranged behind text is
visible.
Background color
Foreground color
S Setting the color for graphics
For a graphic, the foreground color can be set.
Foreground: Specify the color of lines in a graphic and the color of the graphic
itself when the attribute is set to Inverse.
Foreground color
However, with NT30, the NT21, and NT31, setting of white and black (and trans-
parent) is possible.
S Setting the tiling color
When tiling a graphic, color designation is possible for the foreground, back-
ground, and border.
Foreground: Specify the tiling color.
Background: Specify the background color of tiling (color visible through blank
areas in the selected pattern). If [Transparent] is specified, the
background becomes transparent, and elements arranged be-
hind text and numerals are visible.
Border: Specify the border color of tiling area.
Available tiling patterns are shown below.
When tiling a graphic, the color of border should be set to the same color as set
for graphics that surround the tiling element. If a different color is specified, or
there is a gap in the border, the tiling fills out the specified area.
Background
Foreground
Border
Section 6-1