Continuous/Overlapping Screens - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Continuous/Overlapping Screens

5-3 Continuous/Overlapping Screens
Reference: The application manager displays a parent screen as a folder as shown below
PT Model
NT11S/NT11
NT20, NT20S
NT600S
NT30, NT30C, NT620S, NT620C, NT625C
NT21, NT31, NT31C, NT631, NT631C
Screen No.
In a standard screen, all elements can be used.
However, the usable elements depend on the PT models.
Standard screens are also used for creating child screens of continuous/overlap-
ping screens.
Continuous/overlapping screens are multiple screens that are switched consec-
utively or overlapped for display.
Screens that are switched consecutively are called continuous screens and
screens that overlap multiple screens are called overlapping screens.
Screen numbers that can be used for continuous/overlapping screens are same
as those for standard screens. Note that continuous screens cannot be used with
the NT21, NT31, NT31C, NT631, and NT631C. To obtain the same effect as con-
tinuous screens with these PT models, use touch switches that are assigned the
switch screen function.
and child screens are displayed when the folder is opened.
For NT11S/NT11, parent screen setting is not possible.
Section 5-3
Screen Nos.
1 to 250
1 to 250, 256 to 500
1 to 1000
1 to 1899, 2000
1 to 3999
89