Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 434

Quick Reference
Item
Extended
To notify the PC (PLC) of
Input/Out-
the ON/OFF status of an
put (NT30/ external switch
NT30C
only)
To input a numeric value
using an external switch
(numeric keys, etc.)
To turn ON/OFF the lamp,
connected to a PT, ac-
cording to the status of a
PC (PLC) bit
To output the status of a
touch switch to an exter-
nal device
Operations
To change grids
To copy a created graphic
Operation
[Tools] [Table] [Extended I/O input]
Set the Notify Bit Function for an extended I/O input table
entry.
PT
Extended input
(1) [Objects] [Data Input]
Create a numeral setting input field.
(2) [Tools] [Table] [Extended I/O input]
Set the control code input function for an extended I/O
input table entry.
Extended input
(control code input function)
7 8 9 +–
4 5 6
1 2 3
CL
0 .
[Tools] [Table] [Extended I/O Output]
Set a PC (PLC) bit for an extended I/O output table entry.
PT
Extended
I/O table
Extended I/O output
(1) [Objects] – [Touch Switch] – [Function: Notify Bit]
Create a touch switch and notify the PC (PLC) of the
status of the touch switch.
(2) [Tools] [Table] [Extended I/O Output]
Set the same PC (PLC) bit as the one set in (1) above
for an extended I/O output table entry.
PT
Extended
output
Touch switch
(notify bit function)
[Screen] – [Grid]
(1) Specify the graphic to be copied.
(2) [Edit] [Copy]
(3) [Edit] [Paste]
If screen data of the same PT model setting is opened by
[Import Component] from the [File] menu, copy & paste
operation above is possible between the Support Tools.
PC
Extended
I/O table
(PLC)
[Numeral]
PT
123
Numeral setting input field of
numeral setting element
PC (PLC)
PC (PLC)
Ladder
Extended
I/O table
Section 10-1
Refer to
7-5
6-4-1
7-5
7-6
6-8-1
7-6
5-1-2
6-1-5
3-3-6
423