Text - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Fixed Display
Guidance

6-2-7 Text

Note
Operation procedure
Attribute: Specify the display attribute.
Standard, Inverse, Flash, Inverse Flash
Color
Foreground: Specify the line color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
S A sector is defined by the center point, the start point, and the end point
The line type is specified using line style attribute.
Center point: Indicates the position of the center of a sector.
End point: Indicates the position of the end point of a sector.
The end point can be dragged to a desired position to change
the position of the end point.
Start point: Indicates the position of the start point of a sector.
When the start point is dragged, the start point position and
sector radius are changed.
S When tiling a sector, paste a tiling element in it.
Tiling element
Sector
For details of tiling element, refer to 6-2-8 Tiling.
Text is drawn.
Text can be used with all models.
(1) Text is drawn. Font, size, color, etc. can be changed.
Mark data can be inserted into a character string. With the NT30, NT30C,
NT620S, NT620C, NT625C, NT21 and NT31/631-V2 and above with
NT20/30/620-compatible mode set, image data can also be inserted.
Selection using the menu bar:
Selection using the drawing toolbar:
Section
[Objects] [Fixed Display]
6-2
[Text]
145