Fixed Display
Operation procedure
Terminology
Property setting
Guidance
154
(1) The mark data, fixed at 16
Selection using the menu bar:
Selection using the drawing toolbar:
Background color
General
Position:
Indicates the display position of mark data.
(The attribute point is at the upper left corner in the mark data.)
Code:
Indicates the character code of the mark data to be displayed.
Attribute:
Specify the display attribute.
Standard, Inverse, Flash, Inverse Flash
(With the NT21, NT31, NT31C, NT631 and NT631C, the Inverse
attribute is not supported.)
Scale:
Specify the character size.
1 1 (Equal), 1 2 (High), 2 1 (Wide), 2 2, 3 3, 4 4, 8 8
Smoothing:
Specify whether smoothing processing is executed for mark
*1
data.
(Setting is not possible for the NT21, NT31, NT31C, NT631 and
NT631C)
Color
Foreground:
Set display color of mark data.
Background:
Set the color of background in the mark data display area.
:
Displays the list for selecting the mark data.
*1:
For the NT21, NT31, NT31C, NT631, and NT631C, even under condition
that the string has smoothing ON and the mark has inserted, it will not
work.
S By specifying mark data, special characters and symbols can be created on
the screen.
S To display a mark, specify its code.
S If no mark data has been created for the specified code, a blank is displayed.
S To change the mark data to be displayed, click on
ting dialog box and select the desired mark data in the list.
16 dot size, is displayed.
[Objects]
[Fixed Display]
Foreground color
Section
6-2
[Mark]
in the property set-