Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 69

Operation of Screen Data (Application) File
Reference: S It is not possible to save data in DOS format.
If the file was opened using [New], the operation to be followed is the same as
for saving a file by selecting [Save As].
Save As:
The created or edited screen data is saved by specifying the folder and the file
name.
S File name setting dialog
If you select [Save] when creating new screen data or [Save As], the file name
setting window (Save As) opens.
NTST Application (*.onw)
After inputting the folder and file name, click the
data is saved to the specified file.
If the file name of an existing file is specified, a message requesting confirma-
tion that the file is to be overwritten is displayed.
S File types
When saving files in file name setting dialog, either of following two file types
can be selected.
S NTST screen data (*.onw) format (onw format)
This is a standard file format for Support Tool.
Use this format to save screen data normally.
S Memory map image file (*.mmi) format (mmi format)
This is a file format to which screen data is compressed after deleting informa-
tion used only for Support Tool. (Data to be lost are grid setting and grouping
information.)
Use this format for purposes such as transferring screen data using FD.
It is advisable to save the same data with onw format also, since part of in-
formation are lost with this format as mentioned above.
Once you saved data, specified file types will not be changed until you exit the
Support Tool or perform saving/reading the onw file. (Data will be saved in the
format same as before when you select "Save" to save it.) If you want to change
the file type, select "Save As."
S Once you read the data that was created using DOS version Support Tool by
NT-series Support Tool for Windows, do not upload the data with DOS tool
Section 3-3
Button the screen
55