Operation Procedure; Related Elements - Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Numeral Memory Table
Screen
Numeral display
element
Numeral data
input element

7-2-1 Operation Procedure

Setting
Reference: For PT models other than NT20, NT20S and NT600S, numeral memory table

7-2-2 Related Elements

278
With elements such as numeral display, graph, and numeral input, reading/writ-
ing of a numeric value is executed by specifying the numeral memory table entry
number.
PT
1234
Read
2345
Write
Bar graph
Read
A numeral memory table entry is displayed by the operation described below.
S At the property settings for individual elements, click on
number field.
S Select [Tools] (menu bar)
For numeral memory table entries, the objective of an operation is specified by
clicking on a line. The necessary setting can be made by input using a keyboard
or by selection using a drop-down list.
For the operation procedure for
,
(Note that
element property.)
entries No. 247 to No. 255 are used by the clock function and, therefore, cannot
be allocated to a PC (PLC).
S When reading numeral data from a numeral memory table entry
Numeral display element
[Objects] [Numeral Display]
Bar graph element
[Objects] [Graph]
Analogue meter element
[Objects] [Graph]
Broken-line graph element
[Objects] [Graph]
Trend graph element
[Objects] [Graph]
Numeral memory
table
Initial value
Initialization
Storage type
No. of words
PC (PLC)
0
address
I/O comment
Reference
1
2
3
4
5
[Table], then click the [Numeral] tab.
, and , refer to 7-1 Common Operation.
cannot be used if it is displayed by the operation using an
[Bar Graph]
[Analogue Meter]
[Broken-line Graph]
[Trend Graph]
Section
Shared
PC (PLC)
Shared
Shared
in the table entry
, ,
7-2
,