Grid Setting - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Types of Screens, Common Dialog Box Settings and Operations
Load Local 2 (NT21 and NT31, NT31C, NT631, NT631C with "-V1" and above)
System Keypad (other than NT11S/NT11, NT21, NT31, NT31C, NT631 and NT631C)
Color - Background (NT30, NT30C, NT31C, NT620C, NT625C, NT631C)

5-1-2 Grid Setting

80
If the attribute is checked, a window (keyboard) pops up when the screen is dis-
played. Window (keyboard) does not pop up if the attribute is not selected. If the
attribute is not set when the standard screen is created, it can be selected later to
display.
Specify the screen number of window/keyboard screen to be displayed as a pop-
up window/keyboard.
Window (Keyboard) will be displayed at the position specified when window/key-
board screen was created.
With NT30, NT30C, NT620S, NT620C, NT625C, and NT31, NT31C, NT631,
NT631C below "-V1," window is called a keyboard window since it is used to
place keypad (touch switch) for inputting numeral/string.
With the NT21 and with the NT31, NT31C, NT631 and NT631C with "-V1" and
above, it is simply called a window since all kinds of objects other than thumb-
wheel can be registered on it. For details of window/keyboard screen, refer to 5-4
Window/Keyboard Screens.
Select whether or not a local window 2 pops up on the screen when standard
screen is opened.
If the attribute is checked, window pops up when the screen is displayed. Win-
dow does not pop up if the attribute is not selected. If the attribute is not set when
the standard screen is created, it can be selected later to display.
Specify the screen number of window screen to be displayed as a pop-up win-
dow.
Window is displayed at the position specified when window/keyboard screen
was created.
For details of window/keyboard screen refer to 5-4 Window/Keyboard Screens.
Specify whether or not the keypad that is automatically created by the system is
used for setting numerals or strings.
If the attribute is selected, the system keypad is used and it is not used if the at-
tribute is not selected.
Set the background color.
Specify the grid used for drawing.
The grid is used as the guide when drawing an element. When the grid is se-
lected, dots are set in the specified spacing.
The grid can be set so that the specified points of an element being drawn are
positioned at grid points.
To display the attributes, follow any of the operations indicated below.
S [Attributes] of screen property
Section 5-1