Window Moving Touch Switch; Print Screen Touch Switch - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Touch Switches

6-8-8 Window Moving Touch Switch

Settings
Guidance

6-8-9 Print Screen Touch Switch

Settings
Guidance
Function: Moving window
Function setting only.
When a window move touch switch on a window is pressed, window can be
moved by touch panel operation at PT.
This touch switch function is available only with the NT21 and with the NT31,
NT31C, NT631, and NT631C "-V1" and above.
Procedure for moving a window is as follows:
1) Press a window move touch switch on a window to be moved.
2) Press the touch panel at a destination position of a window (center position of
window comes) and a window moves to that position.
Window
Screen
(1)
Function: Print screen
Printing of Display Screen
Start: Specify when starting printing of screen hard copy.
Abort: Specify when aborting printing.
S A print screen touch switch is used to print the image (hard copy) of the pres-
ently displayed screen.
S Printing of a hard copy can be aborted by pressing the abort touch switch if it is
selected in Settings.
S The print screen function cannot be used with the NT20, NT20S, NT21, and
NT600S.
S With conventional models where the same memory area is shared by the print
screen function and the input key-window/keyboard function, it is not possible
to print a hard copy while a window (keyboard) is displayed.
Window in a moving status
Screen
(2)
Section 6-8
Screen
(3)
223