Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 495

System Installer Operation
Functions of the Main Window
The functions provided by the main window of the system installer are described
below.
Drive:
Specify the drive where the system program is stored. Click on
the drive name from the displayed items.
The drive in the network can be selected only when it is allocated to "My Com-
puter." (When installing on a personal computer, the system installer will be
installed but the system program will not be installed.)
PT Model:
Specify the PT model for which the system program is installed. Click on
and select the drive name from the displayed items.
Select NT31, NT31C, NT631 or NT631C to use NT31, NT631C, NT631 or
NT631C.
Com Port:
Specify the port used for communications with the PT. Click on
the drive name from the displayed items. Selection is possible from [COM1]
and [COM2].
Look in:
Specify the folder where the system program is stored. The folder can be
opened or closed by double clicking on the folder line.
Among the folders that are open, the folder at the bottom line is selected.
System File(s):
The system programs in the specified folder and those for the specified PT
model are displayed. Specify the system program that is to be installed at the
PT from among the displayed programs. The extension of a system program
file name represents the PT model.
Appendix B
and select
and select
487