Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 549

The error message that may be displayed while using the Support Tool, and the
action to take in response to them, are shown below.
The indications [W] and [E], given at the beginning of an error message, classify
the level of errors as indicated below.
[W]:
[E]:
Sign % display or other element(s) cannot
overlap with the Trend Graph.
A Application version mismatched; Com-
munication aborted.
C Cannot have more than XXX child
screens.
Clock Monitoring Address has not been
set.
Constant Value is out of limit. Maximum
value restored.
Continuous screen does not allow child
screen to have Thumbwheel/Numeral/
String Input elements.
Control/Notify/Window Control area can-
not overlap each other.
Cursor Move Touch Switch does not
have any association link.
Appendix K
Error Messages
Minor error (permits transmission and execution of screen data)
Major error (disables transmission of screen data)
Error Message Corrective Action
A "% display" or other element is overlap-
ping the trend graph. Move the element
outside the trend graph frame.
System program version installed in a PT
maybe a lower one. For details of the com-
bination of system program version that
can be transmitted and the PT model set-
ting at the Support Tool, refer to 11-1-2
Available Data Communication Methods
by PT Models.
For details of updating the system pro-
gram, refer to Appendix B.
When creating a new screen, insert a
number of child screens that does not ex-
ceed the maximum limit.
With an NT21 PT, set the Clock Address to
define a clock Data Area so the clock data
can be read from the PLC.
Correct the screen data or the program in
the host so that a constant of up to 8 digits
set for the copy setting touch switch will
suffice.
Delete thumbwheel switches, numeral in-
put elements, and/or character string input
elements.
Make sure that the PT status control area,
the PT status notify area and the window
control area are not overlapping each oth-
er.
Select the cursor moving touch switch on
the screen, choose [Draw] – [Associate],
then specify the element with which the
selected touch switch is to be associated.
547