Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 482

Data Conversion
Correction related to image/library in character strings
Correction of graphic display attributes
Status before
Conversion
Conventional model New model
Assume the code is The code is X –
X. EA20.
New model Conventional model
Assume the code is The code is Y +
Y. EA20 (if the con-
verted code is out-
side the usable
range, the code is
fixed as FA20.)
When an image/library in a character string is converted between a conventional
and a new model, conversion is executed in the manner shown below due to dif-
ferences in handling of the image/library between them.
S Difference
New models:
Conventional models:
S Conversion result, error message and corrective action
Status before
Conversion
With a conventional With a new model,
model, the image/li- the code is dis-
brary is used in a played like this:
character string. \<!xxxx>."
(The code after con-
version conforms to
the image/library
code conversion
method.)
When a graphic is converted between a conventional and a new model, conver-
sion is executed as shown below due to differences in the display attributes.
S Difference
New models:
Conventional models:
Status after
Error Message
Conversion
[E]
Library Table Entry
has been con-
verted.
[W]
The code for screen
element [Object
Name] has been
converted from
XXXX to YYYY.
[W]
The code for screen
element [Object
Name] has been
converted from
XXXX to YYYY.
Insertion of an image/library into a character string is
impossible except for NT21, NT31/631-V2 and later
models in NT20/30/620-compatible mode.
Insertion of an image/library into a character string is
possible.
Status after
Error Message
Conversion
[E]
Image Table entry
has been con-
verted.
[E]
String Table: Table
Entry XXXX has in-
valid component
code. It has been
converted from
XXXX to YYYY.
The inverse attribute is not supported for some kinds
of graphic.
All graphics have inverse attributes.
Appendix A
Corrective Action
If the code after conver-
sion differs from the li-
brary code to be used,
change the code to the
correct one. (Refer to
8-2 Library Editor.)
Corrective Action
Delete a code in the
character string and
make corrections so that
the character string and
image/library (fixed dis-
play or image lamp) are
overlapped for display or
grouped, allowing the
image/library to be dis-
played in the same way
as a character string.
(Refer to 6-1-7 Grouping
Elements.)
(In case of lamp/touch
switch label, a fixed dis-
play-image goes behind
the label and the display
will not be as desired. In
this case, use an image
lamp instead.)
473