Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 412

Creating the Sample Data
Reference: The explanation above described the procedure for creating numeric keys using
Settings Control Key
Label Label
Settings Control Key
Label Label
Settings Control Key
Label Label
400
S Setting the label of the [0] key
(4) Press
the label properties as shown below.
Note that other properties must be left unchanged,
Scale
Smoothing
Click on , (returns to touch switch property) then click on
again.
S Adjusting the size and position of the [0] key
(5) Specify the [0] key and select [Edit] (menu bar)
(6) Adjust the size and position of [0] key frame.
(7) Drag [0] to adjust the display position.
the touch switch control code input function. The Support Tool, however, pro-
vides numeric keys as symbol data and you do not have to create numeric keys
by using the pre-registered numeric keys; in the menu bar, select [Window]
[Symbol Manager] and drag the numeric keys appropriate for your PT model
from the symbol file (Supplmnt.sbl). The selected numeric keys can be regis-
tered on the screen. For details, refer to 6-10 Registering Created Elements
(Symbol Manager Operation).
S Creating other keys
(8) Copy the [0] key, paste it onto the screen and move the pasted [0] key to
the position of the key to be created ([1] to [ ]).
Once the [0] is copied to the clipboard, it remains on the clipboard until the
next cut or copy operation.
(9) Set the properties as shown below for the individual keys.
1 2
*1 *1
n, n,
1 2
8 9
*1 *1
n , 8 n , 9
*2
n
,
<!FFFF>
*1: Press
*2: Press
mark by pressing
(10) For the [+/–] key and the [CLR] key, modify the label size to 1 2. For other
keys, the label size should not be modified.
button in the general property of a touch switch and set
3 4
*1 *1
n, n,
3 4
. CLR
*1
n , . n , CLR
*1
button to set the label.
button to set the label. It is also possible to select a
button in the label property.
Section
2 2
n
[Edit Object].
5 6
*1 *1
n, n, n,
5 6
+/–
*1 *2
n , +/– n , n ,
<!FFFA> <!FFFB>
9-3
7
*1
7
*2