Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 250

Graphs
Guidance
–100%
Table Entry: Specify this item if a –100% value is set with a numeral memory
table entry: set the table entry number of the numeral memory
table.
Value: Specify this item if a –100% value is set with a constant:
set the value to be taken as the –100% value.
Note that specification for –100% is valid only when [Display Sign] is selected.
S The following types of broken-line graph element are provided.
0% to 100% display
Direction: Right
³ Higher digit word
Direction: Left
² Higher digit word
–100% to 100% display
Direction: Right
³ Higher digit word
Direction: Left
² Higher digit word
S Which of [0 to 100%] and [–100 to 100%] broken-line graphs is displayed
should be selected with the setting for [Display Sign] in the general properties.
Check mark set:
Check mark not set: 0 to 100% display
S If you specify a broken-line graph element, only one broken line is displayed.
To modify the settings for the broken line, select the broken line to be modified
and click on
Direction: Up
Direction: Down
Direction: Up
Direction: Down
–100 to 100% display
. The line properties are displayed.
Section 6-9
°Higher digit word
±Higher digit word
°Higher digit word
±Higher digit word
237