Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 307

Extended I/O Input Table
When Notify Bit is specified
When Input Key – Control is specified
294
Notify Bit Address
Specify the PC (PLC) bit where the event of the input terminal going ON is noti-
fied.
Comments
Specify a comment for a PC (PLC) bit.
A comment can comprise up to 16 characters.
Control Key
Select the control code to be input when the input terminal goes ON from the list.
: Inputs numeral 0 in a data input field.
: Inputs numeral 1 in a data input field.
: Inputs numeral 2 in a data input field.
: Inputs numeral 3 in a data input field.
: Inputs numeral 4 in a data input field.
: Inputs numeral 5 in a data input field.
: Inputs numeral 6 in a data input field.
: Inputs numeral 7 in a data input field.
: Inputs numeral 8 in a data input field.
: Inputs numeral 9 in a data input field.
: Inputs hexadecimal A in a data input field.
: Inputs hexadecimal B in a data input field.
: Inputs hexadecimal C in a data input field.
Section 7-5