Starting-Up And Exiting The Support Tool; Start-Up Procedure - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Starting-up and Exiting the Support Tool

3-1

Starting-up and Exiting the Support Tool

3-1-1 Start-up Procedure

Reference: Up to two Support Tools can be started up at the same time.
38
The procedure for starting up the Support Tool installed in your personal comput-
er and exiting it is shown below.
To start up the Support Tool, select [Programs]
Series Support Tool] beginning with the Windows start button.
After the start-up of the Support Tool, the main window, shown below, is dis-
played.
You can copy and paste the screen data or table data between them by open-
ing the two different screen data files. To start up the second Support Tool, se-
lect [Import Component] from the [File] menu in the main window of the first
Support Tool (It is not possible to start up the second Support Tool from the
[Start] menu of Windows). For details, refer to 3-3-6 Importing Components
from Different Screen Data File (Starting Up the Second Support Tool).
Section
[Omron] [NTST4.8E]
3-1
[NT-