Saving The Created Data; Downloading To The Pt - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Creating the Sample Data
Setting the pop-up display range frame

9-3-13 Saving the Created Data

9-3-14 Downloading to the PT

Setting the PT status control area and PT status notify area
Downloading to the PT
402
Set the range for pop-up display.
(1) Move the range specifying frame, displayed at the upper left section in the
screen, to the numeric key area and adjust its size so that the keys and tem-
porary input field are enclosed.
For details of changing the size and the position of pop-up display frame,
refer to 5-4 Window/Keyboard Screens.
(1) Select [File] (menu bar)
Data (Application) to a File.)
(2) Specify the file name of the file where the created data is saved (example:
SAMPLE.ONW) and click on
(1) Select [Tools] (menu bar)
(2) Click the [Control/Notify Area] tab and set the properties as shown below.
(For details of Control/Notify area, refer to 3-3-1 Creating New Screen Data
(Application) File.)
PT Control Area
PT Notify Area
(1) Place the PT in the [transfer mode] by the system menu operation.
(2) At the Support Tool, select [Connect] (menu bar)
Support Tool PT)]
[Save As]. (Refer to 4-2-10 Saving the Screen
.
[PT Configuration].
PC (PLC) Address
Comments
PC (PLC) Address
Comments
[Application].
Section 9-3
D00100
Control Area
D00110
Notify Area
[Download (NT-series