Mark Editor; Screen Configuration; Creating Marks Using The Mark Editor - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Mark Editor

8-3

Mark Editor

Reference: The NT-series Support Tool cannot handle marks of 32 32 dots and 64 64

8-3-1 Screen Configuration

8-3-2 Creating Marks Using the Mark Editor

Displaying the mark editor
342
Special symbols and marks can be created by tiling selected dots in a 16 16 dot
area. (For NT11S/NT11 it is 8 16 dot.)
The created mark data can be inserted into mark data displays and character
string displays.
dots. If marks created by the DOS version Support Tool are imported, 32 32 or
64 64 dot size marks must be represented by dividing and grouping them as
16 16 dot size mark data.
The screen configuration of the mark editor is shown below.
Standard toolbar
Drawing toolbar
(1) [Tools] (menu bar)
The mark data list dialog box is displayed.
In the mark data list dialog box, the mark data registered for the codes are
displayed.
(2) Select the code in the mark data list dialog box and click on
double click the area corresponding to the code in the list.
[Mark Editor]
Section 8-3
Image display area
Edit area
, or