Library Object (Data) - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Fixed Display

6-2-11 Library Object (Data)

Note
Operation procedure
The procedure for selecting the desired mark data is shown below.
(1) Click on in the attribute setting dialog box to display the mark data
selection dialog box.
(2) Specify the mark data to be displayed. The specified field is displayed en-
larged. Or, input the character code that corresponds to the mark data to be
displayed into the [Code] input field.
(3) Click on
S For the procedure for creating mark data, refer to 8-3 Mark Editor.
Library data is displayed.
There are two types of library data. One type of library data references the fixed
code directly, the other type uses indirect reference. Indirect reference is a func-
tion that can change the library data to be displayed by writing the library code to
the numeral table entry just like the indirect reference of numeral/string display.
This enables the animation display by switching the display contents using a sim-
ple program. For details of the PT models that can use indirect reference, refer to
Appendix E Table of Functions of Each PT Model.
Library data cannot be used for NT11S/NT11, NT20, NT20S and NT600S.
(1) Library data consisting of fixed display elements is displayed.
By registering a graphic created using multiple fixed display elements as the li-
brary data, the same graphic can be arranged in different positions.
Selection using the menu bar:
to close the dialog box.
[Objects]
[Library Display]
Section 6-2
[Fixed Display]
155