Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 212

Lamps
Guidance
S For image/library lamp element, the image/library data that is displayed when
the PC (PLC) bit is ON and the image/library data that is displayed when the PC
(PLC) bit is OFF are specified independently.
To display the image data or the library data only when the PC (PLC) bit is ON or
OFF, cancel the check mark in the check box of the bit status for which the image/
library data is not to be displayed.
S To select the image/library data to be displayed, click on
and select the desired image/library data from the list.
Click on the line of the desired data to display the line in reverse video and click
the Button.
Clicking the
S If the data is not registered to the specified code, the mark shown below is dis-
played on the screen.
S For the procedure for creating the image data, refer to 8-1 Image Editor.
S For the procedure for creating the library data, refer to 8-2 Library Editor.
Button enables the direct display of the specified code.
Section 6-5
/
199