Image/Library Lamps - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Lamps
Reference: S With a standard lamp, only the lamp color and the label color change. To

6-5-2 Image/library Lamps

Operation procedure
(2) Drag the label to change the display position.
(1)
S When displaying a string as a label, mark data and image data can be inserted
into a string by clicking the
Button. On the NT21 and NT31/631 without NT20/30/620-compatible mode,
image data cannot be used in a string.
change the contents of a label, create image/library lamps and display different
image/library data according to the status of the lamp.
Example:
ON
Image/library lamp
S With the NT21 and NT31/631-V2 and above, you can also change the contents
of a label by specifying ON OFF Static as label type.
S With the NT21 and NT31/631 without NT20/30/620-compatible mode image
data cannot be inserted into a label.
Different image/library data are displayed according to the status of a PC (PLC)
bit.
Display when Display when
the bit is OFF the bit is ON
(1) The image data or the library data is switched to be displayed according to
the status of the allocated PC (PLC) bit.
Selection using the menu bar:
(2)
Button or the
OFF
Bit status
PC (PLC)
[Objects] [Lamp]
Section 6-5
[Image]
197