Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 389

Creating the Sample Data
Creating the [Menu] button, [Set] button, and [Alarm] button
(10) Specify [0%] at the upper left of the trend graph and drag it to the % display
position.
(11) Specify the bar graph frame and adjust the size and position of bar graph
frame.
S Creating bar graph 2
(12) Specify all of label, bar graph frame, and % display of [Bar Graph 1] and
copy and paste them onto the data creation screen.
(13) Move the pasted bar graph 1 element, which was pasted at the upper left
area in the data creation screen, to the position of [Bar Graph 2].
(14) Double click the label "Bar Graph 1," which has been moved to the bar
graph 2 position, and modify the properties as shown below.
Label
(15) Double click on the frame of bar graph 2 and modify the properties as
shown below. Note that other properties must be left unchanged.
Settings Value
100%
0%
–100%
S Creating the [Menu] button frame
(1) Select [Objects] (menu bar)
(2) Create the [Menu] button frame by dragging the mouse at the button dis-
play position.
(3) Set the properties as shown below.
Section
Bar Graph 2
Table Entry 5
n
Display %
Table Entry
n, 300
Display %
Table Entry
n, 0
Display %
Table Entry
n, –300
Display %
[Touch Switch]
9-3
377