Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 185

Data Input
Input using touch switches (copy function + control code input function)
Reference: To copy (in the numeral table) and display a numeral by a single key operation,
Input using extended input (control code input function)
Operation procedure
Related elements and settings
172
PT
Screen
key
Input field
50
Set
Set Copying the
set data
(1) Copy the preset data (numeral memory table entry or constant) to the input
field using the copy function allocated to a touch switch.
(2) Press the touch switch to which the
code input function) to write the data that was copied (set) to the input field to
the specified numeral memory table entry.
without using the key code, use a touch switch (copy function) and a numeral
display element.
PT
Screen
Display field
50
Part type A
PT
Screen
Input field
50
Extended
input
(1) By turning ON an external switch that is connected to an external input, the
numeral or the control code set for the extended input function can be input
to the numeral setting input field.
(2) Press the touch switch to which the
set at the input field to the specified numeral memory table entry.
(For the setting of an extended input, refer to 7-5 Extended I/O Input Table.)
Selection using the menu bar:
Selection using the drawing toolbar:
Touch switch (control code input):
Numeral
memory table
No.1
50
No.2
No.3
50 No.4
No.5
key code is allocated (by the control
Numeral
memory table
No.1
50
No.2
No.3
50 No.4
No.5
Numeral
memory table
No.1
key
50
No.2
No.3
No.4
No.5
External
numeric keys
key code is allocated to write the data
[Objects]
[Objects]
Control code input function
Section 6-4
[Data Input] [Numeral]
[Touch Switch]