Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 463

Printing Reports
Reference: S Printing information on errors occurring during data conversion
Memory Table Entry Number:
Image/Library Number:
S Specification of "History Report"
If you specify "History Report" for [Report Type], you are requested to specify
the file name where the display history record data sent from the PT is stored.
S Specification of "Validation Report"
If you specify "Validation Report" for [Report Type], you are requested to speci-
fy whether an error check is to be executed and then the result of the check is to
be printed or the present error log information is to be printed.
If an error check is executed, the existing error log is lost. To keep the record on
the error for which the message is displayed like after the conversion, select
"Print Current Error Log Window."
To print the result of error check, click on
Validation." A message asking if you want to execute an error check is dis-
played. The time necessary for error check execution varies depending on the
registered screen data.
The procedure for printing information on errors occurring during data conver-
sion is shown below.
(1) Data of NT-series Support Tool
S Open the source file.
printed. If the notify
bit function is set, however, the notify bit number is
printed.
Specify this when there is a character string dis-
play, numeral display, bar graph, and/or input
setting element on the screen and if you want to
print the element with the set memory table
entry number.
Specify this when there is image data display
and/or library data display on the screen and
you want to print the displayed data with the
image/library code number.
Section 12-2
after selecting "Print After
453