Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 191

Data Input
Reference: With the NT21, NT31, NT31C, NT631, and NT631C, the settings, such as the
178
S It is possible to create a temporary input field at the same time as numeric keys
are arranged in the window/keyboard.
A temporary input field is created using a numeral input element.
When a numeral input element is arranged in the window/keyboard, the ele-
ment is automatically set as a temporary input field.
Only one numeral input element (temporary input field) can be created for one
window/keyboard.
S Setting processing differs as shown below depending on whether or not a tem-
porary input field is used.
When a temporary input field is used
(2)
Storing by pressing
key
Temporary input field
(1) The data that is input using numeric keys is displayed in the temporary input
field.
(2) Input the key, and the data in the temporary input field is set in the numer-
al setting input field and stored in the numeral memory table at the same
time.
When a temporary input field is not used
(2)
Storing by pressing
key
(1)
(1) The data input using numeric keys is directly set in the numeral setting input
field.
(2) Press the key, and the set data is stored in the numeral memory table.
Display Sign cannot be set at setting property of temporary input field (These set-
tings are determined by the numeral input field on a base screen). When a nu-
meral input field is used as a temporary input field for the NT21, NT31, NT31C,
NT631, and NT631C, specify the required No. of digits (sign digit + integer digit +
decimal point + decimal digit).
When the numeral values entered are confirmed, upper/lower limits
are checked. Otherwise the system may operate unpredictably.
Numeral memory table
(1)
Numeral memory table
CAUTION
Section 6-4