Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 186

Data Input
Terminology
Property setting
Touch switch (copy setting):
Extended I/O input table (control code input):
Cursor (focus) moving touch switch
Sign digit
Integer
Input digits of maximum limit
General
Position: Indicates the display position of the numeral setting input field.
(The attribute point is at the upper left corner of the input field.)
Font type: Specify the font for the numerals to be input.
Standard, Half Height, Double Width
(Only Standard can be set for NT11S/NT11.)
Size: Specify the size of numerals to be displayed.
1 1 (Equal), 1 2 (High), 2 1 (Wide), 2 2, 3 3, 4 4,
8 8 (Not supported for NT20, NT20S) (Only 1 1 (Equal) and
2 1 (Wide) can be set for NT11S/NT11.)
Smoothing: Specify whether or not smoothing processing is executed for
numerals.
(Setting is not possible for NT11S/NT11, NT20, NT20S and
NT600S.)
Attribute: Specify the display attributes (attributes to be displayed depend
on PT models.)
Standard, Inverse, Flash, Inverse Flash
Color
Foreground:
Background:
Settings
Table Entry: Specify the table entry number of the numeral memory table
where input data is stored.
[Objects]
Copy setting
[Tools]
Foreground
Background
Focus (cursor) frame
Decimal
Specify the numeral color.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Specify the color of the background in the numeral display
area.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Section
[Touch Switch]
[Table] Control code function
6-4
173