Table of Contents
Advertisement
Operating the Application Manager
4-2-12 Sending (Downloading) the Data to a PT
Operation using the mouse
S The results of the error check can be printed or saved in a file. For details, refer
to Section 12 Making Reports.
The procedure for displaying the error log window is shown below.
(1) Select [View] in the menu bar, then choose [Error Log].
The error log window opens.
With some types of errors, double-clicking on the error message will display the
screen(s) where the error has occurred.
For the meaning of error message and the solution to be taken to correct the er-
ror, refer to Appendix A Data Conversion and Appendix H Error Messages.
The data created using the Support Tool can be sent (downloaded) to a PT. It is
possible to send the screen data collectively or only the data of the specified
screens or memory tables. Here, only the procedure is described. For details,
refer to 11-3 Sending (Downloading) the Data.
Before sending the data, set the communication conditions (communication port
and communication speed [Baud Rate]) by selecting [Connect] (menu bar) and
[Comms. Setting].
S Sending (Downloading) the whole data file
(1) Right click the mouse on the screen data file icon, then select [Download].
If the screen data is free of errors, sending of the data starts immediately.
A message is displayed if the data has an error.
S Sending (Downloading) specified screen
(1) Specify the screen icon.
Multiple files can be selected by dragging the mouse cursor while pressing
the Shift key or Ctrl key.
(2) Make a right click on the selected screen icon, then choose [Download].
(3) Specify if child screens of continuous/overlapping screens are also to be
sent, then click the
If the screen data is free of errors, transmitting of the data starts immediately.
A message will be displayed if the data has an error.
Button.
Section
4-2
71
Hide quick links:
Advertisement
Chapters
Table of Contents
