Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 148

Common Operation
Operation procedure
Property setting
Conversion
responding object will be enabled/disabled according to the interlock bit: when
the PLC Address set on the Interlock address is 'ON' the touch switch/thumb-
wheel/numeral input/string input will work; if the address is 'OFF', the touch
switch/thumbwheel/numeral input/string input will not respond to the touches.
The interlock functionality is supported for the PT models NT21 and
NT31/631-V2 and above. The temporary input object does not support interlock
function.
Select the Interlock tab on the property sheet of the screen object that supports
Interlock.
This property page will be the same for all other supported objects. Only the cap-
tion will be changed according to the object.
Interlock Check Box
To ON/OFF interlock. By default it is OFF.
PLC Bit Address
To specify the bit address associated with Interlock. Interlock is ON, if this bit is
set, OFF otherwise.
IO Comment
I/O Comment for the address specified.
For conversions due to cut/copy/paste, drag/drop of screen elements with inter-
lock settings (e.g. Touch Switch, Thumbwheel, Numeral Input, and String Input)
Section 6-1
135