Table of Contents
Advertisement
Common Operation
Reference: To check "Flash" and "Inverse Flash" display on the screen, specify [Simulate
Settings for numeral display
124
Standard:
Text is displayed in the specified color and specified back-
ground color.
Inverse:
Text and background are displayed in colors that are the re-
verse of the specified colors.
Flash:
Text flashes when displayed. If this attribute is selected, stan-
dard display and no display (background color only) are alter-
nately displayed.
Inverse Flash: Text is displayed by alternating standard display and inverse
display.
Flash] from the [View] menu. (For details, refer to 5-1-3 Changing the Display
Method on the Support Tool.)
Set the size and display attributes for displaying numeric values of numeral table
data and percentage values in a graph in the manner shown below.
The following shows only the common settings for numeral display.
As an example, the properties of a numeral display are described below.
Font Type
Specify the font type.
Standard:
A numeric value is displayed in the standard font (16 8 dots).
Half Height:
A numeric value is displayed in the half-height font (8 8 dots).
Double Width: A numeric value is displayed in the double-width font (16 16
dots).
Half height
Standard
Scale
Specify the character size. (Only 1 1 (Equal) and 2 1 (Wide) can be set for
NT11S/NT11.)
1 1 (Equal): A numeric value is displayed at the original size both in height
and width.
Section
6-1
Hide quick links:
Advertisement
Chapters
Table of Contents
