Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 385

Creating the Sample Data
Creating the image/library lamp image data
S Adjusting the size and position of the lamp
(5) Specify the "Lamp 1."
(6) Select [Edit Object] from [Edit] menu.
For methods of specifying an element consisting of multiple elements, refer
to 6-1-3 Selecting an Element.
(7) Specify the "Lamp 1" and adjust the size and position of the lamp frame.
(8) Adjust the position of the "Lamp 1" character string by dragging it.
S Creating lamp 2
(9) Copy [Lamp 1] and paste it onto the data creation screen.
(10) Move the pasted [Lamp 1] to the [Lamp 2] position.
(11) Double click the mouse on the pasted [Lamp 1] and modify the properties
as shown below. Note that the properties not shown here must be left un-
changed.
Light Address
Functions Functions
Label Label
*1: Press
If the I/O comment is already set for the PLC address of light function,
clicking on
(12) Create [Lamp 3], [Lamp 4], and [Lamp 5] in the same manner.
(13) Modify the properties as shown below meeting the individual lamps.
Light Address PC (PLC)
Functions Bit Address
I/O
Comment
Label Label
*1: Press
If the I/O comment is already set for the PLC address of light function,
clicking on
Create two kinds of image data for the image/library lamp.
Create the image data for codes FE20 and FE21.
FE20 FE21
PC (PLC) Bit Address
I/O Comment
to set the label.
button copies the label.
n, Lamp 4
Lamp 3
L0000002 L0000003
Lamp 3 Lamp 4
n, Lamp n, Lamp
*1 *1
3 4
to set the label.
button copies the label.
Section 9-3
L0000001
Lamp 2
n, Lamp 2
*1
n, Lamp 5
L0000004
Lamp 5
n, Lamp
*1
5
373