Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 193

Data Input
Input using touch switches (character string input function + control code input function)
Input using touch switches (copy function + control code input function)
Reference: To copy (in the character string memory table entry (string table)) and display a
180
PT
Screen
Input field
ABC
ABC DEF GHI
Touch switches
(1) Set the character strings to be input using the character string input function
to touch switches.
(2) Press a touch switch to set the label that is set for the touch switch into the
character string input field.
(3) Press the touch switch for which the
code input function) to write the character string set at the input field to the
specified character string memory table entry (string table).
PT
Screen
Input field
ABC
ABC
(1) Copy the preset data (character string memory table entry (string table)) to
the input field using the copy function allocated to a touch switch.
(2) Press the touch switch for which the
code input function) to write the data that was copied (set) into the input field
to the specified character string memory table entry (string table).
character string by a single key operation, without using the
touch switch (copy function) and a character string display element.
PT
Screen
Display field
Part type A
Part type A
Copy
Character string memory
table (String table)
No.1
key
ABC
No.2
Writing
No.3
No.4
No.5
key code is allocated (by the control
Character string memory
table (String table)
No.1
key
ABC No.2
No.3
SET
No.4
ABC
Copying the
No.5
set data
key code is allocated (by the control
Character string
memory table
(String table)
No.1
No.2
Part type A
No.3
No.4
Part type A
No.5
Section 6-4
key code, use a