Table of Contents
Advertisement
Numeral Display
6-6
Numeral Display
Operation procedure
Terminology
Property setting
200
The contents of a numeral memory table entry are displayed.
Numeral displays can be used with all models.
Screen
Display field
50
(1) The contents of the specified numeral memory table entry are displayed.
Selection using the menu bar:
Selection using the drawing toolbar:
Sign digit
Integer
Display digits of maximum limit
General
Position:
Indicates the display position of the numeral display field.
(The reference point is at the upper left corner of the display field.)
Font Type:
Specify the font of the numeric value to be displayed.
Standard, Half Height, Double Width
(Only Standard can be set for NT11S/NT11.)
Scale:
Specify the scale of the numeric value to be displayed.
1 1 (Equal), 1 2 (High), 2 1 (Wide), 2 2, 3 3, 4 4, 8 8
(Only 1 1 (Equal) and 2 1 (Wide) can be set for NT11S/NT11.)
Smoothing:
Specify whether or not smoothing processing is executed for
numeric values to be displayed.
(Setting is not possible for NT11S/NT11, NT20, NT20S and
NT600S.)
Attribute:
Specify the display attribute (attributes displayed depend on the
PT model.) Standard, Inverse, Flash, Inverse Flash
PT
Numeral
memory table
No.1
No.2
No.3
No.4
50
No.5
Read
[Objects]
Foreground
Background
Decimal
Section
6-6
[Numeral Display]
Hide quick links:
Advertisement
Chapters
Table of Contents
