Saving The Screen Data (Application) File - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Operation of Screen Data (Application) File
Reference: S Recent used files will be shown at the bottom of [File] menu. Recent four files

3-3-3 Saving the Screen Data (Application) File

54
The dialog box for the applicable folder, file name, and files of type exist appears
to specify them.
NTST Application (*.onw)
After specifying the folder, file name, and file type click on the [Open] button.
The application manager of the read out screen data is displayed.
With NT-series Support Tool for Windows, following screen data files can be han-
dled.
onw
mmi
For details, refer to File Types in page 55
can be opened from this command.
S NT-series Support Tool for Windows (Ver. 4.7) can read the screen data that is
created using an earlier version of NT-series Support Tool.
S It is not possible to read screen data created by NT-series Support Tool for Win-
dows (Ver. 4.7) with an earlier version of NT-series Support Tool.
S With MMI files, the screen data created by the Support Tool Ver.4 can be read
using Support Tool Ver.3.j as long as the PT model is supported with Ver.3.j.
(With MMI format, user group and grid information will be lost.)
e.g.
NT30C MMI file created with Ver.4.j
! Can be read with Ver.3
NT31C-V2 MMI file created with Ver.4.j
! Cannot be read with Ver.3
After creating the screen data, save it to a file.
The procedure for saving the screen data to a file is: [File] (main window menu)
[Save], or [File] (main window menu)
Save:
The existing screen data of the opened file is overwritten by the new screen
data.
Section
[Save As].
3-3