Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 464

Printing Reports
Setting margins
Setting footer and header
454
S Select [Tools]
sion destination).
S Execute data conversion.
Data of DOS version
S Specify the file using [File]
S Execute data conversion.
(2) If an error occurs, the message "Application conversion has resulted
some messages in Error Log." is displayed.
Click on
(3) Select [View] [Error Log] to display the error log.
(4) Select [File] [Print] and set the properties as shown below.
S Report Type:
Validation Report
S Destination:
Printer, or Rich Text Format
S Screen:
Print Current Error Log Window
For details of data conversion, refer to Appendix A Data Conversion.
Specify the margins to define the print area.
Top
GGGGGGGGGGGGGGG
GGGGGGGGGGGGGG
GGGGGGGGGGGGGG
GGGGGGGGGGGGGG
GGGGGGGGGGGGGG
GGGGGGGGGGGGGG
GGGGGGGGGGGGGG
GGGGGGGGGGGGGG
Bottom
Left Right
The units for dimensions can be selected between cm and inch.
Specify contents of header and footer to be printed.
The header/footer print position can be set as Left, Center, or Right.
Left Center
Header GGGGGGG
GGGGGGG
Footer
GGGGGGG GGGGGGG
Center
Left
Page numbers, date, time, and file name can be printed automatically.
To select the item to be printed as a header or a footer, move the cursor to the
[PT Configuration] and specify the PT model (conver-
[Import].
.
Right
GGGGGGG
GGGGGGG
Right
Section 12-2