Changing The Display Method On The Support Tool - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

Types of Screens, Common Dialog Box Settings and Operations
Grid Size - Custom
Grid Size - Touch Switch Grid
Display Grid
Snap to Grid
Reference: S When saving screen data using mmi format, grid setting information and

5-1-3 Changing the Display Method on the Support Tool

Reference: In addition to the display methods indicated below, Support Tool has a filter func-
Confirming full tiling status
S [Screen] (menu bar)
Set the grid spacing in the horizontal and vertical directions to create the grid of
the desired spacing, respectively.
Horizontal Spacing:
Vertical Spacing:
If this attribute is selected, grid spacing equivalent to the size of a touch switch is
set. The actual size differs depending on the PT model.
Specify whether or not the grid is displayed.
To display the grid, tick the check box of this attribute. If you want not to display
the grid, cancel the tick in the check box.
Specify if the specified position of an element being drawn is automatically ad-
justed so that it coincides with a grid position.
To adjust the element position, tick the check box of this attribute. If adjustment is
not necessary, cancel the tick in the check box.
grouping information will not be stored.
(Refer to 3-3-3 Saving the Screen Data (Application) File.)
S It is possible to select whether to print screen grid or not when printing screen
image. (Refer to 12-2-2 Output to a Printer.)
If grid is to be printed, the grid setting of each screen will be included in the
screen image.
The procedures for changing the screen display method and displaying the in-
formation on elements are indicated below.
tion that displays only the elements of the selected type. (Refer to 5-1-4 Filter
Function.)
When [Full Tiling] is selected in the [View] menu with a tick mark entered on the
left side of the menu item, the element is displayed on the Support Tool screen in
the tiled status.
Specify the grid spacing in the horizontal direction as
a number of dots.
Specify the grid spacing in the vertical direction as a
number of dots.
Section 5-1
81