Table of Contents
Advertisement
Graphs
E.g. Modifying the percentage value display position.
(1)
(3) To change the size of a displayed percentage value, double click on the val-
ue.
The properties of a percentage value display are displayed.
Position:
Indicates the display position of the percentage value.
(The reference point is at the upper left corner of the percentage
value.)
Font Type:
Specify the font of the value to be displayed.
Standard, Half Height, Double Width
Scale:
Specify the scale of the value to be displayed.
1
1 (Equal), 1
Smoothing:
Specify whether or not smoothing processing is executed for the
value to be displayed.
Attribute:
The display attribute can not be set (fixed as standard display).
Color
Foreground: Specify the color of the percentage value.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Background: Specify the background color of the percentage value display
area. (Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
When displaying a specific value (reference value) in an analogue meter, the
percentage value are calculated based on the values for 100%, 0%, –100%
(2)
2 (High), 2
1 (Wide), 2
Section
6-9
2, 3
3, 4
4, 8
8
233
Hide quick links:
Advertisement
Chapters
Table of Contents
