Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 440

Preparation for Data Communications with a PT and Data Communication Procedure
Reference: The type and content of individual transmission differs between the
Type of PT
Hardware
PT model
selected at
Support Tool
NT31, NT31C, NT631,
NT631C without "-V1"
NT31, NT31C, NT631,
NT631C "-V1"
NT31, NT31C, NT631,
NT631C "-V1 (System
Ver.2.1)"
NT31, NT31C, NT631,
NT631C "-V2 (System
Ver.3.1)"
PT Model
NT620C, NT625C
NT31
NT31C
NT631
NT631C
f: Possible : Not possible
NT20/NT20S/NT600S and the NT21, NT31, NT31C, NT631, and NT631C. For
details, refer to 11-3 Sending (Downloading) the Data and 11-4 Receiving
(Uploading) Data.
In case of NT31, NT31C, NT631 and NT631C, screen data file that can be trans-
mitted is as follows depending on the version of PT hardware and the system pro-
gram version installed in a PT.
Use the method below to check the system program version of a PT (For details
of the operation of a PT, refer to the manual of PT).
(1) Display the system menu on a PT.
(2) At the upper right position of the system menu screen, its version is dis-
played, like "Ver.2.10." If you are using NT31, NT31C, NT631 or NT631C, it
is also possible to check the PLC vendor by selecting [Expansion Mode]
[Version Display].
NT31, NT31C, NT631, NT631C
below "-V1"
System System System
program program program
Ver.1.0 Ver2.0 Ver2.1
f f

2
 
 
f : Downloading/Uploading is possible (Both Batch Transmission and Individ-
ual Transmission are possible).
: The message shown below is displayed on transmitting.
Application version mismatched; communication aborted.
: Message warning you about 32 dot font and font type ISO-8859 is displayed
1
on transmitting. If this combination is selected, 32 dot font and font type
ISO-8859 are displayed on a PT but they are not available on the Support
Tool.
: Message warning you about 32 dot font and font type ISO-8859 is displayed
2
on transmitting. If this combination is selected, 32 dot font and font type
Batch Transmission
f
f
f
f
f
NT31, NT31C, NT631, NT631C
System System
program program
Ver3.1 Ver1.0
f f
1

2 2

2 2
 
2
Section
Individual Transmission

f
f
f
f
"-V1" and above
System System System
program program program
Ver2.0 Ver2.1 Ver3.1
1 1
f f
 f
 
11-1
1
f
f
f
429