Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 487

Data Conversion
Correction related to the lamp label (ON state)
Correction related to the maximum and minimum limit check function for numeral input
Correction related the number of digits for numeral input
478
If a lamp's label is converted between a conventional and a new model, conver-
sion is executed in the manner shown below due to difference of label color set-
ting.
S Difference
New models:
Conventional models:
S Conversion result, error message and corrective action
Status before
Conversion
With a conventional With a new model;
model; Background: Trans-
Background: Any parent
Foreground: Any OFF State: Same
as Foreground
ON State: Black
In the conversion of the data between a conventional and a new model, conver-
sion is executed in the manner shown below due to differences in the range of
numeral that can be input.
S Difference
New models:
Conventional models:
S Conversion result, error message and corrective action
Status before
Conversion
With a new model, With a conventional
a numeral setting model, maximum
input field for which and minimum value
a numeric value greater than 8 digits
greater than will be reset.
100000000 or
smaller than
–10000000 is speci-
fied as a maximum
or minimum limit is
registered to the
symbol manager.
In the conversion of the data between a conventional and a new model, conver-
sion is executed in the manner shown below due to differences in the range of
numeric values that can be input.
S Difference
New models:
Conventional models:
ON state and OFF state can be set independently.
Background color is transparent only.
Only foreground color can be set. (OFF, ON/Flash
has same color). Background color can be set as de-
sired.
Status after
Error Message
Conversion
––
A numeric value of up to 10 digits can be input for the
maximum/minimum limit.
A numeric value of up to 8 digits can be input for the
maximum/minimum limit.
Status after
Error Message
Conversion
[W]
Numeral Input Maxi-
mum value is out of
limit. Default values
restored for maxi-
mum and minimum.
A numeric value of up to 10 digits can be input.
A numeric value of up to 8 digits can be input.
Appendix A
Corrective Action
This will lead to an invis-
ible label when the lamp
is ON. Select the lamp
and choose [Edit] – [Edit
Object] and double click
at the label. Then
change the label ON
state color to different
color.
Corrective Action
Create a new numeral
setting input field. Cor-
rect the screen data or
the program in the host
so that a constant of up
to 8 digits suffices. (Re-
fer to 6-4-1 Numeral In-
put, 6-4-3 Thumbwheel
Switch.)