Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 73

Operation of Screen Data (Application) File
Possible Operation between Two Support Tools
S It may take time to read out MMI file since data checking is performed before
opening the file.
While screen data files of the same PT model are opened with the two Support
Tools, following operations are possible.
a. Copying, cutting, pasting and drag & drop of a screen between application
managers (multiple screens can be also handled). (Refer to 4-2-4 Copying a
Screen.)
b. Copying, cutting, pasting and drag & drop of a table data between application
managers (All the data in a table is handled, it is possible to handle a table
entry individually or to handle multiple table entries collectively.) (Refer to
4-2-9 Copying the Whole Table.)
c. Copying, cutting, pasting of a number/code between the following table
entries (Drag & drop is not possible).
Between image table entries (Refer to 8-1-1 Operating the Image Table.)
Between library table entries (Refer to 8-2-1 Operating the Library Table.)
Between bit memory table entries (Refer to 7-1-4 Edit Operation.)
Between numeral table entries (Refer to 7-1-4 Edit Operation.)
Between string table entries (Refer to 7-1-4 Edit Operation.)
Between extended I/O output table entries (Refer to 7-1-4 Edit Operation.)
Between extended I/O input table entries (Refer to 7-1-4 Edit Operation.)
d. Copying, cutting, pasting and drag & drop of objects between editing screens
or library editors. (Drag & drop can not be performed if the copy destination
Section 3-3
59