Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 421

Quick Reference
Item
Screen
To switch the displayed
display
screen using an arrow
symbol key
To switch the displayed
screen using an external
switch
To display a pop-up
screen (help, menu, etc.)
using a touch switch
410
Operation
(1) [Objects] [Touch Switch]
Control]
Create the [ ] and [ ] touch switches. or [Screen]
[Properties] [System Keypad: Tick]
Display the [ ] and [ ] keys of the system keypad.
(2) [Screen] [New] [Parent Screen: Continuous]
Specify the screen to be switched to when the
key is pressed.
Note With the NT21, NT31, NT31C, NT631 and NT631C, it
is not possible to create continuous screens. There-
fore, set the screen switching function for the touch
switches created in step (1).
PT
Screen No. 1
Screen No. 2
[Tools] [Table] [Extended I/O input]
Set the extended I/O input table screen switching function.
PT
Screen No. 1
(1) [Objects] [Touch Switch]
board]
Create a touch switch for which the window display
function is set.
(2) [Screen] [New]
Create the window/keyboard screen to be displayed.
Note For a keyboard, the data registered to the symbol
manager can be used. Creation is also possible using
[Touch Switch] – [Function: Input Key – Control]
Screen
[Function: Input Key –
or
Screen No. 3
Screen No. 2
[Input Key-Window/Key-
Screen
Keyboard
screen
Section 10-1
Refer to
6-8-5
5-1-1
5-3-1
7-5
6-8-4
1-3-4
6-10
6-8-5