I/O Comment Table; Operation Procedure - Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual

I/O Comment Table

Reference: If "--" is displayed for PLC Bit Address when its "Ref" is Yes, object without PLC

7-7-1 Operation Procedure

Reference: S When only editing an I/O comment of a PC (PLC) address allocated to an ele-
Setting
table entries, extended I/O input table entries, extended I/O output table entries,
and elements, in the form of list. The displayed comments can be edited.
address exist.
Clicking on enables to know which objects is created without PLC ad-
dress.
An I/O comment table entry is displayed by following the operation described be-
low.
S When allocating PC (PLC) address by the setting of lamps and touch switches
Click on in the I/O comment field of the properties displayed for each ele-
ment Specify the edit field
Example:
S [Tools] (menu bar)
[Table]
ment, call out the I/O comment table entry from the property dialog box of the
element.
S To set an I/O comment for multiple PC (PLC) addresses, select the [Tools]
menu, then select [Table].
To edit an address or a comment, display the setting dialog box by clicking on
or edit directly on a table entry.
For the operation procedure for
7-1 Common Operation. (Note that
the operation using an element property.)
Click on
Click
[I/O Comments] tab Specify the edit field
, , and
cannot be used if it is displayed by
Section 7-7
, refer to
297