Omron NT - SUPPORT TOOL FOR WINDOWS V4 Operation Manual page 422

Quick Reference
Item
Screen
To display multiple
display
screens in one screen
To move a window using a
touch switch. (Only for
NT21 and for NT31,
NT31C, NT631, NT631C
with "-V1" and above.)
To open/close/control a
window from the host.
(Only for NT21 and for
NT31, NT31C, NT631,
NT631C with "-V1" and
above.)
PC (PLC) To turn a lamp ON/OFF
Bit Status according to the ON/OFF
Display status of a PC (PLC) bit
Operation
[Screen] [New] [Parent]
Set the child screens, then specify the parent screen on
which to overlap them.
Note With the NT21, NT31, NT31C, NT631, and NT631C, if
a parent screen is created, it is automatically set for
overlapping screens since continuous screens are not
supported.
Screen No. 10
ABC
Screen No. 11
DEF
(1) [Screen] [New]
Create a window/keyboard screen.
(2) [Objects] [Touch Switch]
Register Window Move touch switch on a screen
created in (1).
Window
Screen
Center point of the window/keyboard screen goes to the
position touched next.
(1) [Tools] [PT Configuration]
Allocate Window Control Area to a host.
(2) [Screen] [New]
Create a window/keyboard screen.
(3) Write window screen No. to be displayed and X, Y co-
ordinate in a word to which window control area is allo-
cated.
Window
Screen
[Objects] [Lamp] [Standard]
Set the PC (PLC) Bit address.
PT
Screen
PT
Screen No. 1
ABCDEF
Screen
[Control/Notify Area]
Screen
PC (PLC)
Section 10-1
Refer to
5-3-2
1-3-4
6-8-8
3-3-1
1-3-4
3-3-1
6-5-1
411