Communications Setting Level - Omron E5AN-H User Manual

Communications Setting Level

5-11 Communications Setting Level

psel
Protocol Setting
u-no
Communications Unit No.
bps
Communications Baud Rate
len
Communications Data Length
sbit
Communications Stop Bits
prty
Communications Parity
sdwt
Send Data Wait Time
See
See
• Each parameter is enabled when the power is reset.
• Match the communications specifications of the E5@N-H and the host
computer. If multiple devices are connected, ensure that the communica-
tions specifications for all devices in the system (except the Communica-
tions unit number) are the same.
Item Symbol
psel
Protocol setting
u-no
Communications
Unit No.
bps
Communications
baud rate
len
Communications
data length
sbit
Stop bits
prty
Communications
parity
sdwt
Send data wait time
■ Related Parameter
Communications writing (adjustment level): Page 193
Communications must be supported.
CompoWay/F must be selected as the protocol.
CompoWay/F must be selected as the protocol.
Set values
cwf, mod
CompoWay/F
(SYSWAY), Modbus
0 to 99 0 to 99
1.2, 2.4, 4.8, 9.6, 1.2, 2.4, 4.8, 9.6,
19.2, 38.4, or 57.6 19.2, 38.4, or 57.6
(kbps) (kbps)
7 or 8 bits 7 or 8 bits
1 or 2 bits 1 or 2 bits
none, even, odd
None, Even, Odd
0 to 99 0 to 99 (ms)
Section 5-11
Settings Default
cwf
1
9.6
7
2
even
20
281