Communications Setting Level - Omron E5AZ User Manual

Communications Setting Level

5-7 Communications Setting Level
u-no
Communications unit No.
bps
Baud rate
len
Data length
sbit
Stop bits
prty
Parity
Function
Setting
See
120
• Each parameter is enabled when the power is reset.
• Match the communications specifications of the E5AZ/E5EZ and the host
computer. If a 1 : N connection is being used, ensure that the communica-
tions specifications for all devices in the system (except "Communications
unit No.") are the same.
Displayed
Parameter
Characters
u-no
Communications
unit No.
bps
Baud rate
len
Data length
sbit
Stop bits
prty
Parity
■ Related parameters
"Communications writing" (adjustment level) (page 87)
Communications function must be
supported.
Set Value
0, 1 to 99
1.2 / 2.4 / 4.8 / 9.6 / 19.2 (kbps)
7 / 8 (bit)
1 / 2
none / eVen / odd
Highlighted characters indicate defaults.
Section 5-7
Setting Range
0 to 99
1.2/2.4/ 4.8/
9.6/19.2 (kbps)
7/8 (bit)
1/2
None/even/odd