Explanation Of Indicators - Omron E5AN-H User Manual

Names of Parts
E5EN-H
1-1-2

Explanation of Indicators

No. 1 Display
No. 2 Display
No. 3 Display
(E5AN/EN-H Only)
Operation Indicators
1,2,3...
Operation
indicators
Temperature
unit
Operation
indicators
Mode Key
Level Key
Down Key
Displays the process value or parameter name.
Lights for approximately one second during startup.
Displays the set point, parameter operation read value, or the variable input
value.
Lights for approximately one second during startup.
Displays MV (valve opening), soak time remain, or bank number.
Lights for approximately one second during startup.
1. SUB1 (Sub 1)
Lights when the function set for the Auxiliary Output 1 Assignment param-
eter is ON.
SUB2 (Sub 2)
Lights when the function set for the Auxiliary Output 2 Assignment param-
eter is ON.
SUB3 (Sub 3)
Lights when the function set for the Auxiliary Output 3 Assignment param-
eter is ON.
2. HA (Heater Burnout, Heater Short Alarm, Heater Overcurrent Detection
Output Display)
Lights when a heater burnout, heater short alarm, or heater overcurrent
occurs.
3. OUT1 (Control Output 1)
Lights when the control output function assigned to control output 1 turns
ON. For a current output, however, OFF for a 0% output only.
With position-proportional models, OUT1 lights when the "open" output
turns ON.
No. 1 display
No. 2 display
No. 3 display
Up Key
PF (Function (Auto/
Manual)) Key
Infrared Communications
Light Receiver
Ir
Section 1-1
3